Benefits of Bio Diesel

WE DELIVER WHAT WE PROMISE SINCE 1936

Biodiesel – A Clean Alternative Fueling Source in Gresham, Hillsboro & Portland, Oregon (OR)

Biodiesel is the name of a clean burning alternative fuel produced from domestic, renewable resources. Biodiesel contains no petroleum, but it can be blended at any level with petroleum diesel to create a biodiesel blend. It can be used in compression ignition(diesel) engines with no major modifications. Biodiesel is simple to use, biodegradable, nontoxic, and essentially free of sulfur and aromatics.

In 2009 Oregon’s Renewable Fuel Standard (RFS) went into effect which requires all diesel fuel to be a blend with a minimum of 2% biodiesel. In 2011 the mandated level was increased to a minimum of 5%. So all diesel in the state of Oregon, except for that which is used in railroad locomotives, marine engines and home heating oil is a B5 biodiesel blend.


 

Diesel Performance

Successful alternative fuels fulfill environmental and energy security needs without sacrificing operating performance. Operationally, biodiesel blends perform very similar to low sulfur diesel in terms of power, torque, and fuel without major modification of engines or infrastructure.

Biodiesel offers similar power to diesel fuel. One of the major advantages of biodiesel is the fact that it can be used in existing engines and fuel injection equipment with little impact to operating performance. Biodiesel has a higher cetane number than most U.S. diesel fuel. In more than 50 million on-road miles and countless marine and off-road applications, biodiesel shows similar fuel consumption, horsepower, torque, and haulage rates as conventional diesel fuel.

Biodiesel Provides Significant Lubricity Improvement Over Petroleum Diesel Fuel

Lubricity results of biodiesel and petroleum diesel using industry test methods indicate that there is a marked improvement in lubricity when biodiesel is added to conventional diesel fuel. Even biodiesel levels as low as one percent can provide up to a 65 percent increase in lubricity in distillate fuels.

Compatibility of Biodiesel with Engine Components

The switch to low sulfur diesel fuel has caused most Original Equipment Manufacturers (OEM) to switch to components suitable for use with biodiesel, but users should contact their OEM for specific information. In general, pure biodiesel will soften and degrade certain types of elastomers and natural rubber compounds over time. Using high percent blends can impact fuel system components (primarily fuel hoses and fuel pump seals), that contain elastomer compounds incompatible with biodiesel. Manufacturers recommend that natural or butyl rubbers not be allowed to come in contact with pure biodiesel. Blends of B20 or lower have not exhibited elastomer degradation and need no changes. If a fuel system does contain these materials and users wish to fuel with blends over B20, replacement with compatible elastomers is recommended.

Biodiesel in Cold Weather

Cold weather can cloud and even gel any diesel fuel, including biodiesel. Users of a 20 percent biodiesel blend with #2 diesel will usually experience an increase of the cold flow properties (cold filter plugging point, cloud point, pour point) approximately 2 to 10° Fahrenheit. Precautions employed for petroleum diesel are needed for fueling with 20 percent blends. Neat (100 percent) biodiesel will gel faster than petrodiesel in cold weather operations. Solutions for winter operability with neat biodiesel are much the same as that for low-sulfur #2 diesel (i.e., blending with #1 diesel, utilization of fuel heaters, and storage of the vehicle in or near a building). These same solutions work well with biodiesel blends, as do the use of cold flow improvement additives.

Still have questions about the benefits of biodiesel?

Call MNOP today at (800) 523-7676

Contact Us

I'm Interested In

4 + 11 =

We strive to make our customers as happy as possible by being the best supplier we can be and consistently exceeding their expectations. Our goal is to make our customers happy! Stop by and see us at any of our 11 locations in Oregon. We're proud to serve Gresham, Hillsboro, Salem and beyond!

Contact e-mail: support@marcnelsonoil.com
1-800-523-7676
(503) 363-7676
1977 Claxter Road NE, Salem, OR 97301

Apply for Commercial Credit

Apply for Cardlock Credit

Credit applications can be emailed to annie.koenig@marcnelsonoil.com or mailed to our office.